BXTGV - D-70 DEVELOPER
- MSDS: BXTGV
- Manufacturer: MET L CHEK COMPANY
- Product Name: D-70 DEVELOPER
- National Stock Number: 6850-00-160-8480
Product Identification
Product ID:D-70 DEVELOPER
MSDS Date:01/01/1997
FSC:6850
NIIN:00-160-8480
MSDS Number: BXTGV
Responsible Party
SANTA MONICA, CA 90404
US
Emergency Phone: 310-450-1111
Info Phone: 310-450-1111
Cage: 98733
Contractor
Telephone: 310-450-1111/FAX 310452-4046
Cage: 98733
Ingredients
ISOPROPYL ALCOHOL (SARA 313)
CAS: 67-63-0
RTECS: NT8050000
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM/500STEL;9596
BUTANE
CAS: 106-97-8
RTECS: EJ4200000
ACGIH TLV: 1900 MG/M3;800 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1800 MG/M3;1000 PPM
ISOBUTANE
CAS: 75-28-5
RTECS: TI4300000
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:TARGET ORGANS:EYE, SKIN, CNS,
RESPIRATORY & GI TRACTS. ACUTE- MAY CAUSE EYE IRRITATION.
PROLONGED/REPEATED SKIN CONTACT CAN CAUSE DRYNESS & MILD
IRRITATION. EXCESSIVE INHALATION CAN CAUSE IRRITATION, CNS
DEPRESSION. LOW ORDER OF ORAL ACUTETOXICITY. CHRONIC- UNKNOWN.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, HEADACHE, DIZZINESS, NAUSEA,
VOMITING, DROWSINESS, REDNESS, TEARNING, BLURRED VISION, SKIN
DRYNESS
Medical Cond Aggravated by Exposure:PERSONS WITH PRE-EXISTING SKIN
DISORDERS, EYE PROBLEMS OR IMPAIRED RESPIRATORY FUNCTION MAY BE
MORE SUSCEPTIBLE TO THE EFFECTS OF THIS PRODUCT.
First Aid
First Aid:GET MEDICAL HELP IF SYMPTOMS PERSIST. INHALED:MOVE TO FRESH
AIR. PROVIDE CPR/OXYGEN IF NEEDED. EYES:IMMEDIATELY FLUSH WITH
WATER FOR 15 MINUTES. HOLD EYELIDS OPEN. SKIN:WASH WITH PLENTY OF
SOAP & WATE R. ORAL:IF CONSCIOUS, INDUCE VOMITING. SEEK IMMEDIATE
MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:TCC
Flash Point:=11.7C, 53.F
FLAMMABL AEROSOL
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE (CO2), ALCOHOL FOAM
OR DRY CHEMICAL. USE WATER SPRAY TO COOL FIRE EXPOSED CONTAINERS.
Fire Fighting Procedures:WEAR FULL PROTECTIVE CLOTHING AND
NIOSH-APPROVED SELF-CONTAINED BREATHING APPARATUS. COOL
FIRE-EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:SPRAY CANS UNDER PRESSURE. EXTREMELY
FLAMMABLE. EXPLOSION HAZARD EXISTS WHEN SPRAY CANS HEATED. DO NOT
ENTER SPRAY CAN STORAGE AREA IF FIRE PRESENT.
Accidental Release
Spill Release Procedures:LEAKING CONTAINERS SHOULD BE PLACED OUTDOORS,
IN AN OPEN CONTAINER, AWAY FROM SOURCES OF IGNITION. ALLOW PRESSURE
TO DISSIPATE. VENTILATE AREA. ABSORB LIQUID WITH NON-FLAMMABLE
ABSORBENT MATERIALS AND PLACE IN CONTAINER FOR DISPOSAL.
Neutralizing Agent:NOT RELEVANT
Handling
Handling and Storage Precautions:STORE SPRAY CANS IN COOL, WELL
VENTILATED AREAS AWAY FROM SOURCES OF IGNITION AND STRONG OXIDIZING
AGENTS. DO NOT STORE ABOVE 120F.
Other Precautions:"EMPTY" CONTAINERS RETAIN RESIDUE AND MAY BE
DANGEROUS. FOLLOW ALL LABEL INSTRUCTIONS. AVOID REPEATED/PROLONGED
SKIN CONTACT. KEEP OUT OF REACH OF CHILDREN. DO NOT BREATHE VAPORS.
Exposure Controls
Respiratory Protection:IF EXPOSURE EXCEEDS LIMITS,USE NIOSH-APPROVED
RESPIRATOR
Ventilation:MECHANICAL (GENERAL AND/OR LOCAL EXHAUST: EXPLOSION-PROOF
TO MAINTAIN TLV.
Protective Gloves:CHEMICAL RESISTANT
Eye Protection:GOGGLES IF THERE IS LIKLIHOOD OF CONTACT.
Other Protective Equipment:EYE WASH FOUNTAINS & SAFETY SHOWERS SHOULD
BE AVAILABLE.
Work Hygienic Practices:OBSERVE GOOD INDUSTRIAL HYGIENE PRACTICES AND
RECOMMENDED PROCEDURES. WASH THOROUGHLY BEFORE EATING,
DRINKING/SMOKING.
Supplemental Safety and Health
FORMULA CHANGED. FOR PREVIOUS FORMULATIONS SEE PNI A, B AND C, SAME
NSN.
Chemical Properties
HCC:V3
NRC/State Lic Num:NOT RELEVANT
Boiling Pt:=82.2C, 180.F
Melt/Freeze Pt:=-88.3C, -127.F
Vapor Pres:33@68F
Vapor Density:2.1
Spec Gravity:0.8 LIQUID
Evaporation Rate & Reference:1.4 (N-BUTYL ACETATE=1)
Solubility in Water:LIQUID IS SOLUBLE
Appearance and Odor:WHITE, MILKY SUSPENSION - MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
DO NOT STORE OR HANDLE IN ALUMINUM EQUIPMENT AT TEMPERATURES ABOVE 120F
Stability Condition to Avoid:HEAT SPARKS, FLAMES,CONTACT WITH STRONG
OXIDIZING AGENTS
Hazardous Decomposition Products:CARBON MONOXIDE, UNIDENTIFIED ORGANIC
COMPOUNDS
Conditions to Avoid Polymerization:AVOID HEAT SPARKS, FLAMES & CONTACT
WITH STRONG OXIDIZING AGENTS
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. DO NOT PUNCTURE, INCINERATE SPRAY CANS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.